Heavy-duty, battery-electric floor cleaning machinery engineered with micro-dosing water delivery, high down-pressure disk agitation, and anti-corrosion chassis for tropical microclimates.
Designed for narrow-aisle supermarkets in San José and medical parts storage. Boasts a 660mm dual scrub path with instant 3-stage vacuum water collection.
Optimized for high-throughput distribution hubs in Coyol Free Zone. Features an 860mm scrubbing diameter, 130L high-capacity tanks, and parabolic squeegee.
A 1020mm dual-brush powerhouse capable of clearing over 6,500 m²/h. Engineered for deep grease and tire scrub in Puerto Limón logistics depots and manufacturing yards.
Pre-scrub dust control vehicle equipped with mist atomizers to collect tropical dust, gravel, and organic debris before wet scrubber passes in agro-industrial plants.
Strategic analysis of sanitation modernization across the Greater Metropolitan Area (GAM), life sciences export parks, and agricultural corridors.
Costa Rica has firmly established itself as Central America’s premier destination for foreign direct investment (FDI), leading the region in advanced manufacturing, particularly in the precision medical device sector, high-tech electronic assembly, pharmaceuticals, and specialized agro-exports. Clustered around the Greater Metropolitan Area (GAM)—including Alajuela, Heredia, and Cartago—modern Free Trade Zones such as Coyol Free Zone, Global Park, and UltraPARK host Fortune 500 multinationals that enforce ISO 13485, ISO 14644 (Cleanroom Standards), and FDA-aligned Good Manufacturing Practices (GMP).
In these high-specification manufacturing ecosystems, floor hygiene is not merely an aesthetic consideration—it is a critical parameter of operational compliance. Microscopic dust, particulate matter generated by forklift tires, and airborne cross-contaminants can compromise sensitive cleanroom environments. Traditional mop-and-bucket regimes are legally and practically obsolete in these facilities due to secondary contamination risks, chemical run-off, and high residual floor drying times.
Operating industrial machinery in Costa Rica entails navigating unique climatic realities. With relative humidity levels frequently surpassing 85% during the rainy season (May to November) and ambient temperatures ranging from 24°C in the Central Valley to 34°C along the Pacific and Caribbean coastlines, standard floor scrubbers suffer rapid electrical degradation, mold accumulation in recovery tanks, and poor floor dry-off times.
Our engineered solutions for the Costa Rican territory incorporate double-isolated marine-grade wiring harnesses, antimicrobial rotomolded polyethylene solution/recovery tanks, and aerospace-engineered curved cast-aluminum parabolic squeegees. These systems yield residual dry times under 25 seconds even on slick epoxy finishes under saturated ambient humidity, drastically eliminating occupational slip-and-fall hazards in accordance with Costa Rican Occupational Health Council (Consejo de Salud Ocupacional - CSO) requirements.
Treated heavy-gauge steel chassis with powder-coated cathodic electro-deposition, safeguarding components against high salt mist in Puntarenas and Limón port warehouses.
Equipped with smart on-board multi-voltage battery chargers compatible with Costa Rica’s 120V/240V 60Hz grid, supporting rapid opportunistic opportunity charging during shifts.
Closed-loop metered fluid delivery dispenses exact detergent ratios, preventing liquid pooling on porous polished concrete and non-slip urethane screeds.
Bridging global advances in industrial autonomous cleaning, telematics, and mechanical brush chemistry with the practical operational demands of Costa Rican facility contractors.
Globally, commercial floor scrubbing is undergoing a seismic generational shift. Facility managers no longer evaluate machines merely on motor wattage or tank volume; criteria now center on total cost of ownership (TCO), automated telematics reporting (IoT), telemetry for water/chemical auditing, and human ergonomics.
In North America and Europe, severe shortages in facility sanitation labor have driven hyper-adoption of fully driverless scrubbers. In Costa Rica, while commercial labor costs remain lower than in OECD counterparts, the cost of employee turnover, mandatory CCSS (Caja Costarricense de Seguro Social) social security contributions, worker compensation insurance (INS), and ergonomics-related injuries makes the transition from walk-behind to sit-on ride-on scrubbers an undeniable financial win.
| Evaluation Parameter | Traditional Manual Cleaning (Mops/Buckets) | Standard Walk-Behind Scrubber | DIKE Industrial Ride-On Scrubber (KNIAHT Series) |
|---|---|---|---|
| Cleaning Speed / Coverage | 150 – 250 m²/hour per laborer | 1,200 – 1,800 m²/hour | 3,800 – 6,500 m²/hour (Up to 26x faster) |
| Bacterial & Dirt Removal Rate | Under 40% (Cross-contaminates surfaces) | 80% – 88% (Single pass scrubbing) | 98.6% (Controlled down-pressure & vacuum) |
| Water Consumption per 1,000 m² | 180 – 220 Liters (Stagnant contaminated mix) | 60 – 80 Liters | 22 – 30 Liters (High-efficiency eco-dosing) |
| Operator Fatigue & Ergonomics | Extremely high (Repetitive back/shoulder strain) | Moderate (Constant pushing on inclines) | Negligible (Automated power-steering, padded seat) |
| Direct Payback Period (Costa Rica) | N/A (Ongoing operational loss) | 8 – 11 Months | 3.5 – 6 Months against contracted manpower |
Deployments in El Coyol and Heredia. Scrubbing controlled anterooms, ISO 8 gowning perimeters, and clean corridor pathways with non-marking poly wheels and HEPA vacuum exhaust systems.
Heavy mud, sap, and organic chemical residues in Guápiles, San Carlos, and Sarapiquí. Dual cylindrical brush systems eliminate sticky biological film on concrete packing floors.
Ultra-quiet operations (<62 dB(A)) cleaning expansive travertine, polished terrazzo, and decorative pavers in golf clubs, luxury resort lobbies, and convention centres in Papagayo and San José.
A granular look at the motor, vacuum, electronic, and structural design that makes DIKE the preferred OEM supplier for Latin American distributors.
One of the primary failure modes of imported machinery in Central America is electrical failure caused by utility voltage irregularities during lightning storms and grid switching. DIKE scrubbers destined for the Costa Rican market incorporate heavy-duty solid-state Curtis® (or equivalent high-reliability micro-controlled) drive units with built-in over/under-voltage protection (compatible with 110V/120V 60Hz single phase as well as 208V/240V industrial supplies).
Our brush propulsion motors utilize IP54-sealed electromagnetic gearboxes with continuous-duty temperature monitoring. Dual disc brushes exert up to 75 kg of mechanical down-pressure, easily stripping cured tire scuffs and oil contamination without gouging epoxy floor coatings. The scrub deck is molded from heavy structural cast aluminum, resisting oxidation from chemical acids commonly used in food-grade CIP sanitization routines.
Unlike flat squeegees that leak fluid when turning corners, our 3D arc parabolic squeegees utilize imported American Linatex® or oil-resistant polyurethane blades. Combined with an Italian-engineered 3-stage tangential vacuum motor generating up to 180 mbar of water lift, dirty slurry is evacuated immediately into the recovery tank, leaving the floor bone dry behind the machine’s path.
Are you a cleaning equipment distributor, facility management company, or logistics director in Costa Rica? Connect directly with our engineering division for wholesale pricing, container-load logistics to Puerto Caldera or Puerto Limón, and customized OEM colorways.
Direct technical and commercial answers for enterprise procurement, maintenance engineers, and equipment importers in Central America.
All machines exported to Costa Rica are calibrated for 110V–120V / 60Hz single-phase or 220V–240V / 60Hz split-phase configurations. We supply smart, high-frequency chargers with UL/CE recognized components, ensuring safe charging at local industrial and commercial outlets.
We offer complete CIF or FOB ocean freight terms. Shipments from our factory in Wenzhou, China are routed directly to Puerto Limón / Moín (Caribbean side for rapid European/Atlantic connection) or Puerto Caldera (Pacific coast, ideal for the Greater San José Metropolitan Area).
For single-shift operations (4-6 operating hours/day), maintenance-free sealed AGM batteries provide an outstanding cost-to-performance ratio. For 24/7 manufacturing plants in Coyol Free Zone running three shifts, we recommend Lithium iron phosphate (LiFePO4) packs that permit high-speed opportunity charging during lunch breaks.
We maintain a comprehensive spare parts catalog. With container shipments, we supply standardized "Critical Spare Kits" (squeegee blades, brush assemblies, drive belts, solenoid valves) sufficient for 2 years of preventative maintenance, ensuring zero downtime for your fleet.
For unsealed or dusty concrete (common in agricultural supply centers and raw logistics sheds), wet scrubbing directly over heavy dust creates a muddy paste. We recommend pairing your scrubber with our DK-1400 or DK-1800 pre-sweepers to sweep particulate before wet scrubbing.
Yes. Because DIKE machines optimize water and chemical usage via electronic solenoid regulation, facilities participating in the Programa Bandera Azul Ecológica (PBAE) utilize our scrubbers to prove quantifiable reductions in commercial water and effluent discharge.
Complete your environmental sanitation fleet with autonomous robotics, enclosed sweepers, heavy debris vacuums, and municipal waste transport vehicles.
Compact articulated electric sweeper engineered for university campuses, public plazas, and corporate industrial parks in San José.
Fully autonomous SLAM LiDAR floor scrubber built for predictable daily routes in international airports (SJO/LIR) and medical device facilities.
All-weather cabin sweeper with an 1800mm clearing swath, dual filtration, and water spray systems for dry-dock yards and asphalt surfaces.
Combustion-engine-driven heavy industrial vacuum for construction sites, civil infrastructure, and facilities where electrical connections are inaccessible.
Industrial hydro-washer generating intense cleaning pressure for stripping grease, food spills, and sanitizing processing bays in poultry and beef plants.
Electric three-wheeler vehicle for municipal refuse transfer in urban cores, private eco-communities, and expansive resort complexes.
Enclosed air-conditioned cabin road sweeper equipped with a 2000mm sweep path, designed for industrial estate roads, mining perimeters, and city boulevards.
Cordless dual-tank continuous suction vacuum engineered for textile mills, fluff, composite fibers, and micro-fine particulate management.
Whether establishing an authorized distributorship in Costa Rica, equipping a newly commissioned 50,000 m² distribution hub, or supplying tender-qualified cleaning fleets for national hospital networks (CCSS), DIKE delivers unmatched production capacity, custom engineering, and transparent pricing.
